English German
 

 

Power Supply
Raid Module
Card Reader
 
Zippy M1P2-5500V4V 2U Redundant
Peripheral > Power Supply > Zippy >M1P2-5500V4V


M1P2-5500V4V
  • Output Wattage: 500W
  • Best Solution for: Server, Workstation, Storage System, IPC
  • Dimension:
    217.00 x 85.00 x 84.00 (mm)
    8.54 x 3.35 x 3.31 (inch)
AC INPUT SPECIFICATION
 
  • VOLTAGE:90 ~ 264VDC
  • FREQUENCY: 47~63HZ
  • STEADY-STATE CURRENT: 8/4A MAX AT ANY LOW/HIGH VOLTAGE
  • INRUSH CURRENT: 40/60A @ 115/230VAC
  • DC INPUT SPECIFICATION
    OUTPUT VOLTAGE
    OUTPUT CURRENT
    REGULATION
    OUTPUT
    MIN.(A)
    MAX.(A)
    LOAD
    LINE
    RIPPLE & NOISE
    MAX.[P-P]
    +5V
    0.5
    32
    ± 5%
    ± 1%
    50mV
    +12V
    2
    41
    ± 5%
    ± 1%
    120mV
    -12V
    0.1
    0.5
    10%
    ± 1%
    150mV
    +3.3V
    0.5
    25
    ± 5%
    ± 1%
    50mV
    +5VSB
    0.1
    3.5
    5%
    ± 1%
    50mV
    Remarks:
    * +5V AND +3.3V TOTAL OUTPUT MAX: 170W

     

    • TEMPERATURE RANGE:OPERATING 0℃~40℃, STOREAGE -20℃~80℃
    • HOLD UP TIME:16mS IN REGULATOIN LIMIT AT 90VAC INPUT VOLTAGE
    • EFFICIENCY(PER SET):POWER SUPPLY EFFICIENCY TYPICAL >80% AT 230V, FULL LOAD
    • OUTPUT PROTECTION: OPP / OVP / SCP / OCP
    • REMOTE ON / OFF CONTROL
    • BALANCE LOAD SHARING DESIGN
    • HOT-SWAPPABLE/HOT PLUGGABLE REDUNDANCY FUNCTION
    • ISOLATION: BUILT-IN THE POWER MODULE
    • FAULTY ALARM METHODS: BUZZER, TTL SIGNAL
    • EMI: IEC61000-3-2, FCC, CISPR 22(EN 55022)
    • EMS: EN 61000-4-2 ESD, EN61000-4-4 EFT, EN61000-4-5 SURGE
    • SAFETY APPROVAL: UL, CUL, TUV, CCC
    • *THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.