Zippy PSL-6C00V ATX

Description

AC INPUT SPECIFICATION

VOLTAGE: 90 ~ 264VAC FULL RANGE
FREQUENCY: 47~63HZ
STEADY-STATE CURRENT: 15/7.5A AT ANY LOW/HIGH RANGE INPUT VOLTAGE
INRUSH CURRENT: 20A MAX. FOR 110 VAC, 40A MAX. FOR 220 VAC (AT 25 DEGREE C AMBIENT COLD START)
PFC: UP TO THE TARGET OF 95% @230V, FULL LOAD

DC INPUT SPECIFICATION

OUTPUT VOLTAGE	OUTPUT CURRENT		REGULATION		OUTPUT
	MIN.(A)	MAX.(A)	LOAD	LINE	RIPPLE & NOISE MAX.[P-P]
+5V	1	25	± 250mV	± 1%	60mV
+12V1	1	50	± 600mV	± 1%	120mV
+12V2	1	50	± 600mV	± 1%	120mV
-12V	0	0.8	± 600mV	± 1%	120mV
+3.3V	1	25	± 165mV	± 1%	60mV
+5VSB	0.1	3.5	± 250mV	± 1%	60mV

Remarks:
* +3.3V and +5V MAX. POWER: 170W
* +3.3V AND +5V AND +12V2 MAX. POWER:600W
* TOTAL POWER: 1200W(MAX)

TEMPERATURE RANGE: OPERATING 0℃~40℃; STORAGE TEMPERATURE: -20℃~80℃
HOLD UP TIME: 18mS MINIMUM AT 90V FULL LOAD & NOMINAL INPUT VOLTAGE
EFFICIENCY: 83%-88% TYPICAL AT 115V, FULL LOAD
LEAKAGE CURRENT: 3.5 mA. MAX. AT NOMINAL VOLTAGE 264VAC
POWER GOOD SIGNAL: ON DELAY 100 ms TO 500 ms, OFF DELAY 1 ms
POVER POWER PROTECTION: 110%~160%
OVER VOLTAGE PROTECTION: +3.3V→3.6~4.3V, +5V→5.5~6.5V, +12V1→13.2~15.6V, +12V2→13.2~15.6V
OVER CURRENT PROTECTION: +3.3V→27.5~37.5A, +5V→ 27.5~37.5A, +12V1→55~75A, +12V2→55~75A
SHORT CIRCUIT PROTECTION: +3.3V, +5V, +12V1, +12V2, -12V
SAFETY: TO MEET TUV, CB, RFI/EMI STANDARDS
EMI NOISE FILTER: FCC CLASS B, CISPR22 CLASS B
COOLING: 80mm DC FANS
I2C FEATURES (OPTIONAL)
*THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS.